Trio Radios

compared with
Current by Som Phouangpraseuth
on Jun 19, 2013 16:00.

This line was removed.
This word was removed. This word was added.
This line was added.

Changes (3)

View Page History

Step 1: Configure the Serial Port A to use Mode=MODBUS/TCP Gateway, Packet Layer=MODBUS, Protocol=TCP, Protocol Mode=TCP Server, Local IP Port=502 (the listening port from TRIO)\\

Note:  There is a difference between "Modbus RTU in TCP" protocol versus "Modbus/TCP".  The configuration below would allow the Master such as ClearSCADA to use Modbus/TCP using  Modbus Protocol in the properties under Modbus Tab set to "TCP".