Description

These sample programs demonstrate the Vision50's ability to read and display SCADAPack IO database register variables that are used by the RealFLO gas flow computer. The following variables relating to the first two flow runs, Run1 and Run2, are automatically displayed with a 5 second delay on each screen

• The diagram below illustrates the screen display action:

Instructions

To use this sample program:

• Select the following link: RF_VISION50.ZIP
• Select the Open button. (Winzip is opened)
• Select the Use Evaluation Version button. (The Winzip program list is displayed)
• From Winzip, select the file in the display list and then extract it to a target folder on your computer.
• Exit Winzip.

• Open the Vision application.
• Select File | Open to display the Open Vision Application dialog box.
• Browse to the appropriate directory where the sample file is located and select the sample file.
• Select the Open button to open the file.

Disclaimer:
This program is intended to demonstrate one or more programming functions or methods. This is not an application-specific program and is presented as a programming example only. Control Microsystems assumes no liability for the use or application of this example program or any portion thereof.