Problem

I am unable to erase firmware or application from Vision 60 using instructions in the Vision manual

Environment

VISION 60

Fix

In version 2.07 of the Vision software/manual, the Vision-60 initialization displays an incorrect key sequence.

To erase firmware from the Vision 60

• Remove power from the Vision 60.
• Press and hold down the F1 (NEXT) key and re-apply power.
• While holding down the F1 key, press ENT to confirm the erasing of firmware.

To erase application from the Vision 60

• Remove power from the Vision 60.
• Press and hold down the F2 (PREV) key and re-apply power.
• While holding down the F2 key, press ENT to confirm the erasing of application.