Flow computer version 6.40 is included with RealFLO 6.40. This flow computer will not work with SCADAPack 350 or SCADASense 4203 controllers.
Attempting to load flow computer 6.40 into a SCADAPack 350 or SCADASense 4203 controller will result in an error message as shown below.

Flow computer 6.35 or earlier must be used with SCADAPack 350 or SCADASense 4203 controllers.
Flow computer 6.35 for these controllers is posted on the Document Gateway in the RealFLO Software >> Release Downloads section.
If you are not registered on the Document Gateway contact Technical Support at technicalsupport@controlmicrosystems.com and you will be sent a link to the flow computer files.