SCADAPack Controllers

Click images to enlarge.


  • 32 bit RISC processor. 8Mb SDRAM. 4Mb FLASH
  • I/O capacity expandable to 512 digital-out, 512 digital-in, 128 analog-in, 32 counters and 32 analog outputs using the 5000 Series I/O modules.
  • 3 RS-232, 1 RS-232/485, 1 Ethernet ports
  • Optional integrated spread spectrum radio
  • Class 1, Division 2 Hazardous Area Rating
  • 2, 4 or 10 run custody transfer flow computer
  • 3 year warranty on parts and labor


The SCADAPack 32P consists of a 5232 Controller board. Application programs for the controller can be written in either TelePACE Ladder Logic, or optionally IEC61131, and C/C++ language.

The 5232 Controller provides an integrated power supply, three digital/counter inputs, an interrupt input and a status output. The 10-BaseT Ethernet port and three serial communication ports enable connection to a large variety of communication networks. Two of the serial communication ports are RS-232 and the third is configurable for RS-232 or RS-485.

The RS-232 serial communication ports on the controller board support half-duplex and full-duplex communication. They support RTS/CTS hardware handshaking for connection to modems and radio modems. The RS-232 and RS-485 ports operate at baud rates from 300 baud to 38400 baud.

Using 5000 Series I/O modules can expand the I/O capacity of SCADAPack 32P Controllers. A maximum of forty 5000 Series I/O modules may be connected for an expansion of up to 512 digital outputs, 512 digital inputs, 128 analog inputs, 32 counters and 32 analog outputs.

The 5232 Controller memory has 8 Mbytes SDRAM, 4 Mbytes flash ROM, and 1 Mbyte CMOS SRAM. The CMOS SRAM is non-volatile (battery backed.). A real time clock calendar provides for time of day operations and alarms. A hardware watchdog timer protects against application program failures.

Low power applications also benefit from the SCADAPack 32P ability to enable and disable status LED's on all modules connected to the 5000 Series I/O bus including the controller board.

Composite Input/Output Lower Boards

5601 and 5601A Input & Output (IO) Module

5604 Input & Output (IO) Module

5606 Input & Output (IO) Module


SCADAPack 32 Hardware Manual

SCADAPack 32 Datasheet

SCADAPack 32(P)

SCADAPack 32 C++ Tools

SCADAPack 32 Quick Start Guide

SCADAPack 32P Quick Start Guide

SCADAPack 32 Articles

Click the heading to expand/hide.

SCADAPACK 32 Release Notes

Click the heading to expand/hide.


Drawing Name Description .DOC
SCADAPack 32P SCADPack 32P (No I/O Module)
P4-103 SCADPack 32 with 5601 I/O Module
P4A SCADPack 32 with 5604 I/O Module
P4B SCADPack 32 with 5606 I/O Module
Wireless SCADAPAck 32P
MDS and Freewave Radio Based
W4 Wireless SCADAPAck 32
MDS and Freewave Radio Based