Click images to enlarge.

Features

Selectable voltage and current modes
5V and 10V selectable voltage modes
Low power
Class 1, Division 2 for use in hazardous locations

Overview

The Model 5304 analog output module adds four analog outputs to the 5000 Series input/output (I/O) system. Up to 16 Model 5304 modules may be connected to the 5000 Series I/O bus for a total of 64 analog outputs.

SmartWIRE controllers will only utilize the 5304 as a two-channel analog output module. A total of 32 analog outputs are available with the SmartWIRE controllers.

The 5304 outputs can control valve actuators, motor speed controllers, temperature controllers or any device requiring an analog control signal.

The 5304 module generates either current or voltage outputs. In current mode, it can generate either 0 to 20mA outputs or 4 to 20mA outputs. A configuration switch selects the output range. In voltage mode, the outputs can be either 0 to 5V or 0 to 10V. The configuration switch will then select the ranges 1 to 5V and 2 to 10V respectively. The output resolution is 12 bits over the full range. Outputs are isolated from logic circuits, for protection against voltage transients and high common mode voltages.

The 5304 module requires an external 12 to 24 volt DC power supply to power the output circuitry

Manual(s)

5304 Datasheet

5304 Hardware Manual

5304 Articles

Click the heading to expand/hide.

5304 Release Notes