The expected availability for ISaGRAF version 1.48 is May 18, 2004.
- Support for Point-to-Point Protocol (PPP) is added. SCADAPack 32 controller firmware 1.24 is required to support PPP.
- Support for Enron Modbus master functionality in the SCADAPack 32 controller. SCADAPack 32 controller firmware 1.24 is required to support Enron Modbus master.
- Serial port settings dialog corrected to not allow RS-232 Dial-up selection for SCADAPack 100 controller and 4202GFC.
- Controllers can be initialized using COM3 serial port on the 5604 I/O module
- The default modem string for PC Communication Settings is changed to &F0 S0=1 &W0 &Y0.
- The handling of TCP connections is optimized to ensure connections are not being closed and reopened inefficiently.
- The 4202 settings are correctly displayed in the Serial Port Dialog.
- An error message is displayed when invalid IP information is input in the Controller IP dialog.
- Only one instance of Adobe Acrobat Reader is launched when multiple CMI User's Manuals are opened.
- Error message is improved to not display warning that no ports are configured for DNP when DNP is not configured for use.
- The focus returns to the PC-PLC Link Parameters Dialog after the PC Communication Settings dialog is closed.
- The word order is set to ISaGRAF type for 32-bit analog inputs, 32-bit analog outputs and 32-bit counter inputs.
- Two projects may communicate simultaneously from one PC with multiple com ports or an Ethernet port.
- The Communication progress Dialog is properly positioned above the active project.
ISaGRAF version 1.48 will work with previous versions of SCADAPack 32, SCADAPack, SCADAPack LP, SCADAPack 100 or 4202GFC.
To use the added features of ISaGRAF 1.48 the following firmware is required for the controller being used.
- For SCADAPack 32 controllers, firmware file SCADAPack32 ISaGRAF 1.24.mot is required.
- For SCADAPack, SCADAPack LP and SCADAPack 100 controllers, firmware ISaGRAF firmware 1.64.abs is required.
- For SCADAPack, SCADAPack LP and SCADAPack 100 controllers using DNP, firmware ISaGRAF DNP firmware 1.64.abs is required.
- For 4202GFC controllers, firmware ISaGRAF 4202 firmware 1.64.abs is required.
- For 4202GFC controllers, firmware ISaGRAF 4202 DNP firmware 1.64.abs is required.